Table of Contents
- How to Set a Victor Mouse Trap
- How to Set a Tomcat Mouse Trap
- How to Set a Mouse Guard Mouse Trap
- How to Set a Dcon Mouse Trap
- How to Set a Catchmaster Mouse Trap
The age old battle between mice and man. Annoying, tedious and just plain icky, mice have been a plague (and are plague bringers) for centuries. And setting a mouse trap is just the thing you need to get rid of them.
If you want to get rid of these pesky animals once and for all, read on. You will learn how to set a mousetrap in a matter of minutes.
How to Set a Victor Mouse Trap
No matter how small and harmless mice might seem, they’re still vermin. Vermin that can make you and your family fairly sick. Not to mention that they chew through everything and leave droppings everywhere. This is why getting the mouse out of the room is absolutely necessary. You can do so with one of the most effective traps on the market- the Victor mouse trap.
Step -1: Place the Batteries
Electronic mouse traps are one of the best mouse traps in today’s market. This is due to their ease of use yet high effectiveness. All you pretty much have to do is bait the trap and place it in the area of rodent activity. The steps to properly using this mouse trap are rather simple.
First, you’ll have to remove the battery cover and then put the 4 AA batteries in. The batteries come with the trap, so you won’t have to buy any separately. Once you’ve replaced the battery cover, you’ll need to open the electronic mouse trap’s lid.
Step – 2: Place the Bait
Now it’s time to bait a mouse trap. Be careful not to accidentally bait parts of the trap which aren’t meant for the bait. This will trigger the trap automatically. Remember to wear gloves while baiting, because, otherwise, mice will smell the human scent and won’t want to come in.
You can use other things too, like a toothpick for example. The important thing is not to get your scent on the trap. Also, use food which mice will surely like (like peanut butter). Once you’ve set the bait, close the lid.
Step -3: Place the Trap Where the Mice are
You should now place the trap in the radius where you’ve noticed mice traveling. The best place is against a wall in that radius, as the mice will sure pass there. Place the trap lengthwise, with the entrance hole closer to the wall.
Next, you’ll need to turn the trap on. It has a handy indicator light which will shine green. When the trap is powering up, you can hear a faint buzzing sound.
Step -4: Get Rid of the Mouse
Once you catch the mouse, you just have to open the lid and empty the trap into the trash. This provides a unique experience where you won’t have to see or touch the mouse.
How to Set a Tomcat Mouse Trap
Tomcat offers a variety of mouse traps to suit any and all customer needs. You can get disposable kill stations, glue traps, refillable bait stations, mechanical traps, catch and release traps, and many more. The common thing about all these is that they’re very effective and affordable.
The trickiest to set properly of these might just be the glue trap because you can get sticky very easily.The best part about the glue trap is that you can use it to trap other small insects or vermin in your house, too. Mice don’t stand a chance.
Find Where the Rodents are Most Active
First thing’s first, you’ll need to establish the area of rodent activity. Mice build nests and they tend to move in around a 100 feet radius of that nest. So, you’ll need to set multiple traps in that radius, in order to catch a mouse.
Check Your Trap Often
Tomcat glue traps are more convenient than some of its competitors. This is because you can use these traps right away after you unpack them. You don’t have to put them together or anything. To ensure you’ll catch the mouse quickly, place the trap somewhere between the nest and the food.
Mice are most likely to pass by the wall, which is where you should place the trap.Check your trap often, and if there’s no mouse after a few days, put the trap in a different area. Once you caught the mouse, simply dispose of the trap and mouse by throwing them away.
Learn When to Set the Trap
The best time to buy this trap and set it is when you notice rodent activity. There are some clear signs which will let you know that you’ve got a mouse problem. Some of these include droppings, gnawed food packaging or furniture and even damaged parts of the construction (like chewed wires).
How to Set a Mouse Guard Mouse Trap
These traps are also very easy to use. You’ll just need to follow a few steps to set the trap properly. There are two settings on the trap. The firm setting means that the item will be easier to be set up. However, it also means its harder to trip, whereas the sensitive option refers to the trap being easy to trip and slightly difficult to set up.
For the best results, it’s advisable to set the trap somewhere between the two given settings. (Especially if you’re using a Victor trap).Once you caught the mouse, you can just lift the trap’s kill bar and dispose of it and use the trap again. Another option is to throw everything out together.
You should place the trap several feet apart in the part of the house where you’ve seen the mice or rats pass by. They’re not toxic and don’t contain any chemicals, so you won’t have to worry about any children or pets being around. That doesn’t mean you shouldn’t be careful though because we’re all aware how clumsy pets and kids can be.
Remove the Clip and Prepare the Bait
To set the trap, you’ll need to first remove the clip which is securing the kill bar. Next, you should take the arm bar and move it. It should hang over the back of the trap. In order for the rap to work, you’ll need bait. Food high in protein such as peanut butter, hazelnuts or chocolate work perfectly.
Spread your desired bait on the yellow pedal. You should know that the Victor mouse trap doesn’t necessarily need bait to work. However, keep in mind that it will definitely be more successful if you use it.
Hold the Kill Bar Back
Now you’ll need to hold the kill bar back. Do this with your thumb and hold it tightly. You should now move the armbar so it sits over the kill bar. Then, you should fasten the end under the baited pad. This is the part where you should pay attention to the settings.
Prepare the Trap
It’s time to place the trap. Go to the place where rodent activity has been visible. Then, set the trap against the wall, with the baited pad facing the wall. That’s it; all that’s left to do is wait for the mouse!
How to Set a Dcon Mouse Trap
The d-CON trap might just be the most economical solution to your vermin problem. They’re also very reliable and ready to use right out of the box. The d-CON leaves all the worries you might have about mice in the past, as it doesn’t leave anything to chance or to you.
The trap even comes prebaited with cheese, which means you won’t have to speculate how much or what kind of bait to put. It’s also guaranteed to take care of your mouse problem in a jiffy. On top of that, it’s not toxic at all so it’s safe to use even if you have children or pets.
Remove the Staple and Place the Bait
The first thing you’ll need to do is remove the item’s staple. This is what’s holding the trap’s locking bar attached to its wood base. Even though the trap comes prebaited with cheese, you can add a bit more bait and enhance its performance. The advisable amount is around the size of a pea.
You can use more cheese, or you can use something like chocolate and peanut butter. Make sure not to add too much, though, because the trap is less likely to work then.
Hold the Bow Back
Next, you’ll have to hold the bow back. The safest way is to do it with the thumb while you’re pulling it back. You should now lift the prebaited cheese scented pedal to a 45-degree angle. This will engage the trap’s locking bar.
All you have to do now is wait. If the mouse isn’t caught between three to five days of setting the trap, you should relocate it. For the quickest and best results, place multiple traps near one another.
How to Set a Catchmaster Mouse Trap
Up until now, we’ve been talking about mice traps which only catch one mouse per trap. But that’ not very useful if you’ve got a bigger vermin problem which you’d like to take care of yourself. Thankfully, Catchmaster offers a bigger trap which is able to catch around 12 mice among its other mice-catching options. You can use a glue board with this trap, but it will still work fine even if you don’t.
You’ll be happy to know that the trap is safe to use around pets and children. This is because it’s not toxic and because its shape won’t let the curious child or pet get to the dangerous part of the trap. One glue trap is included in the package, but replacement glue boards are always available. On top of that, you can use the trap both indoors and outdoors, and you can use it as a trap which leaves mice alive.
And on top of all that, the trap is extremely easy to set up.
Place the Bait
All you have to do is place some bait inside the bait chamber. Next, place the trap lengthwise against a wall, with the travel radius of the mice. The entrance hole should be closer to the wall. The most important thing to do is be patient. It will take the mice a while to get acquainted with the trap, so it might take around a week before they try to enter it.
Keep the trap in the same place long enough, and the mice will confidently get inside, trapping themselves. It’s also a good idea to use multiple traps and place them around 15 feet away from each other. This increases the chances of catching the vermin.
Lastly, if your mouse traps aren’t working, remember not to give up and try again.
Never again will the mice in your house annoy or plague you. Simply follow the instructions we set out in this article, sit back and relax. You can be sure that your rodent issues are soon going to be in the past.
And so setting up a trap can be quite easy. If you ever again need to face this vile vermin, remember that you now know how to protect yourself. Just be careful with the chemicals and the rat disposal, and everything will be ok. Good luck and happy hunting!